Disabling VRAM limit in NiceHash on Ethereum mining
NiceHash has restricted 4GB GPUs, like popular RX470/480 RX570/580/590, from Ethereum mining due to its DAG file recently reaching 3.8GB in size. In the latest update, also GTX 1060 3GB cards were affected and lost KawPow becoming completely obsolete in NiceHash miner. These are all intentional and artificial measures to eliminate the uncertainty connected with ETH miners' errors. Yet, these changes leave 4GB and 3GB owners without any profit in NiceHash.
cannot write buffer for dagor
cannot allocate big buffer for DAGerrors are the most common results of the increased DAG file.
No supported devices founderror appears just because of VRAM limit for ETH and KawPow miners.
Good news is, Kryptex has no such VRAM limits and there is no need to turn off any restrictions. We help you solve the problem and keep mining a few more months until November! Kryptex will give you the hints and help needed to prolong Ethereum mining for 4GB GPUs.
4GB AMD DAG size problem solution
You may want to start with our Ethereum and DAG file article to better understand better why it is all happening now. TL;DR: GPUs are unable to load the ever increasing DAG file into memory, thus, resulting with miner failure. Yet, here are the tips to keep GPUs working up until November.
Install Kryptex! 💎
We carry no intention to limit any algorithm or coin potential and that is why we have added the Phoenix miner in the latest release, which is better optimized for 4GB GPUs. It allows cards to go as far as ~375 epoch approximated in November.
Update GPU drivers 🏎️
Get the most up-to-date Radeon drivers at AMD's support page. 20.8.1 is the latest version at the time of publication.
Enable compute mode 🧮
Make sure you have AMD's Compute Mode enabled for each GPU after any driver update since that could simply go
off without you knowing that. We created the easy Compute Mode guide to check/set the state.
Optimize PCIe slots positions 🔄
Put the 8GB GPU (if any) in the most-upper PCIe slot on the motherboard and connect a display to that GPU. That will guarantee video output (and VRAM usage) goes through the richest card on memory. Moreover, if your CPU has an integrated video chip, use motherboard's HDMI/DP/etc, to connect a display to a computer. Because video output takes some memory, 4GB GPUs benefit from all that.
Overclock the memory 🔥
In the toughest times, we should squeeze all the juice out of the GPUs: "Go overclocking!" Install MSI Afterburner, increase memory clock and lower the power limit. More details in our "ETH overclocking" article.
Flash BIOS timings 🔧
Phoenix miner has neither rxboost nor straps. To match the hashrate with Claymore, one needs to flash the GPU's BIOS. Aaand, we also have the "BIOS flashing guide" for that too!
Done! Ready to mine again 🚀
These steps will give another couple of months of youth for 4GB GPUs. Since November, those will not be capable of Ethereum mining anymore. No better time for an upgrade!
Choose The Best GPUs for Mining with Kryptex!
There are a lot of steps, and some require some skill. Yet, we are here to help! Reach our community at Kryptex's Telegram chat for tips on overclocking, flashing, or GPU choise 👋🏻 💪🏻
Or contact us directly. We will help you with anything 😁